Plasto-Elastic Polymer Modified Bitumen
Product Description: Plasto-Elastic Polymer Modified Bitumen, known as BITUPLUSSEAL, is a single-component, hot-applied plasto-elastic polymer-modified bituminous concrete paving joint sealant. It is specifically formulated for use in horizontal expansion joints and cracks. This sealant is supplied in solid form and can be applied using sealing melter applicator units.
Applications of Polymer Modified Bitumen: This polymer-modified bitumen is suitable for a range of applications, including:
- Concrete aprons and airport runways.
- Concrete paving on highways, runways, and taxiways.
- Concrete roads.
- Multi-story parking decks.
- Expansion joints in bridges and other concrete structures.
Advantages of Iran Polymer Modified Bitumen: BITUPLUSSEAL offers several advantages, including:
- High polymer content, providing the right viscosity at application temperature to fill cracks effectively.
- Liquid enough to penetrate all tiny cracks and holes, protecting them from water penetration.
Application of Polymer Modified Bitumen: Crack Configuration:
- Minimum Crack Depth: 10 mm.
- Width/Depth Ratio: 1/1.5.
Surface Preparation:
- All surfaces must be clean, dry, and free from loose adhering particles.
Heating:
- Heat up to 170 ±5 ºC in a controlled oil bath or oil jacket melting-vessel with an agitator until achieving a smooth, even, and pourable consistency.
Application:
- Apply using a melter-pourer or, for detailed work, use a metal-lipped bucket.
- Sealing can be done at environmental temperatures of 4ºC and higher.
Cleaning:
- Clean all tools and equipment immediately after use with kerosene or other appropriate solvents.
Safety Instructions: Safety precautions should be taken, including wearing goggles and gloves during application. In case of contact with eyes, wash them immediately with plenty of water and administer first aid.
General Specification of Polymer Modified Bitumen
Color | Black |
Bitumen type | Polymer-modified bitumen |
Density | 1.1 -1.2 kg/l |
Softening Point | ~ +90 ºC |
Penetration | ~ 32 dmm |
Cone Penetration | ~ 23 dmm |
Maximum heating temperature | 190 ºC |
Mixture temperature | 170 ± 5 ºC |
Temperature in the nuzzle | 160 to 165 ºC |
Packing | 16 kg pac |
Delivery:
We offer flexible delivery options to suit your needs, including:
- FOB (Free On Board): The buyer assumes responsibility once the goods are loaded on the vessel.
- CFR (Cost and Freight): We handle the cost and freight up to the named port of destination.
- CIF (Cost, Insurance, and Freight): We cover the cost, insurance, and freight to the named port of destination.
For more detailed information about our delivery options or to make inquiries, please don’t hesitate to contact us. Our dedicated team is here to assist you with any questions or requests you may have.