Blown Bitumen 85/40 Description:
Blown Bitumen 85/40, also known as oxidized bitumen 85/40 or blown asphalt 85/40, is a semi-solid grade of pure petroleum bitumen that is produced through an air-blowing process using an asphalt flux. Its specific physical properties make it suitable for various applications in the construction industry. The numerical values “85/40” correspond to the midpoint of the material’s softening point and penetration, respectively. The softening point is determined in degrees Celsius using the Ring and Ball method (ASTM D36), while penetration is measured in 1/10 mm according to IP49 or ASTM-D5 standards.
Production Process:
Blown Bitumen 85/40 is produced by subjecting bitumen 60/70 to a controlled air-blowing process with very hot air, resulting in the desired softening point and penetration values.
Quality Assurance:
BITUPLUS Company ensures the quality of BITUPLUS Blown Bitumen 85/40 by employing international inspectors to verify quality and quantity during loading onto vessels. Rigorous quality control (QC) is carried out through batch test reports before shipping, with the product designed to meet ASTM standards.
Applications:
Blown Bitumen 85/40 is utilized in a wide range of industries and applications, including but not limited to:
- Chemical industry (for manufacturing paints, lacquers, varnishes).
- Fuel industry.
- Paper-pulp-board manufacturing.
- Textile processing.
- Road construction and pavement.
- Civil engineering projects.
- Roofing.
- Construction materials additive.
- Dust-binding applications.
- Insulating and impregnating agent.
- Manufacturing of rubber and plastic products.
- Paving applications.
- Asphalt-based paints for corrosion protection of metals.
- Lining public works structures.
- Adhesives in electrical laminates.
- Base for synthetic turf.
- Waterproofing.
- Corrosion resistance for pipe coatings.
- Portland cement pavement.
- Hydraulic applications.
- Paint manufacturing.
- Caulking.
- Mastics.
- Damp proofing.
- Insulation and isolation bitumen membrane sheets.
- Automobile undercoating in the automotive industry.
Application Guidelines:
To use Blown Bitumen 85/40, it should be heated to a temperature double that of its softening point to achieve the desired flow and viscosity. Surfaces intended for application must be dry, clean, and free from loose particles, formwork, curing products, irregularities, slurry, and other contaminants.
Storage and Handling:
Blown Bitumen 85/40 has a shelf life of up to 10 years and can undergo multiple heating and cooling cycles.
Packing:
Various packaging options are available for customer convenience, including Kraft bags, meltable plastic bags, drums, and bulk quantities. The product conforms to ASTM standards and is identified by two numbers indicating the softening point and penetration ranges, with 85/40 representing a softening point of 85°C and a penetration of 40 desi millimeters.
Specification of Blown Bitumen 85/40
Bitumen 85/40 | Test method | Unit | Specification |
Specific gravity @25/25 °C | ASTM D70 | (Kg/m3) | 1.05 approx. |
Penetration @ 25°C | ASTM D5 | mm/10 | 35/40 |
Softening point °C | ASTM D36 | °C | 80/90 |
Ductility @25 °C | ASTM D113 | Cm | 3 |
Loss on heating(wt) % | ASTM D6 | Wt. % | 0.2 max |
Flashpoint °C | ASTM D92 | °C | 260 min |
Solubility is CS2(wt) % | ASTM D4 | Wt. % | 99 min |
Spot test | A.A.S.H.O.T 102 | — | Negative |
For more detailed information about our delivery options or to make inquiries, please don’t hesitate to contact us. Our dedicated team is here to assist you with any questions or requests you may have.