BituPlus Bitumen Emulsion CMS-2h is a cationic medium-setting bitumen emulsion containing 65% bitumen. This specially designed water-based bitumen emulsion has a moderate viscosity and setting time, making it ideal for premixing applications. It has a chocolate brown color and flows freely at ambient temperatures. This high-quality bitumen emulsion is suitable for filling potholes and conducting patch repairs using open-graded cold premix made on-site. Common methods for repairing potholes with this asphalt emulsion include the throw-and-roll technique and full-depth removal and replacement.
Typical properties of CMS-2h: BituPlus manufactures asphalt emulsion CMS-2h in strict compliance with ASTM D2397-13, AASHTO M208-16, or IS 8887: 2004 standards.
Please note that the properties and characteristics of this bitumen emulsion are in accordance with these industry standards, ensuring its reliability and suitability for various road maintenance and repair applications.
Property | Min | Max | Test Method |
Viscosity, Saybolt Furol at 25°C, SFS | – | – | ASTM D7496 |
Viscosity, Saybolt Furol at 50°C, SFS | 50 | 450 | ASTM D7496 |
Storage stability test, 24-h, % | – | 1 | ASTM D6930 |
Demulsibility, 35mL, 0.8% dioctyl sodium sulfosuccinate, % | – | – | ASTM D6936 |
Coating ability and water resistance: | |||
Coating, dry aggregate | Good | ASTM D244 | |
Coating, after spraying | Fair | ASTM D244 | |
Coating, wet aggregate | Fair | ASTM D244 | |
Coating, after spraying | Fair | ASTM D244 | |
Particle charge test | positive | positive | ASTM D244 |
Sieve test, % | – | 0.1 | ASTM D6933 |
Cement mixing test,% | – | – | ASTM D6935 |
Distillation: | |||
Oil distillate, by volume of emulsion, % | – | 12 | ASTM D6997 |
Residue, % | 65 | – | ASTM D6997 |
Tests on residue from distillation test: | |||
Penetration, 25°C (77°F), 100g, 5s | 40 | 90 | ASTM D5 |
Ductility, 25°C (77°F), 5cm/min, cm | 40 | – | ASTM D113 |
Solubility in trichloroethylene, % | 97.5 | – | ASTM D2042 |
Advantages:
Here are some advantages of BituPlus Bitumen Emulsion CMS-2h:
- No Heating Required: This product does not require heating, making it environmentally friendly and energy-efficient.
- Cost and Energy Efficient: It offers cost-effective and energy-efficient solutions for various applications.
- Easy and Even Mixing: The emulsion allows for easy and uniform mixing, ensuring consistent results.
- Low Temperature Curing: It can cure at low temperatures, making it suitable for a wide range of conditions.
- Minimum Preparation Time: Surface repairs can be carried out quickly with minimal preparation time.
- High Adhesive Properties: It has excellent adhesive properties, ensuring a firm and long-lasting patch.
- Resistant to Stripping: This emulsion is resistant to the stripping of water, providing durability in various weather conditions.
- Bonds Well with Cool, Damp Surfaces: It effectively bonds with cool and damp surfaces, enhancing its versatility.
Applications:
BituPlus Bitumen Emulsion CMS-2h is ideal for the following applications:
1. Patch Repairing & Pot Hole Repairing:
- Clean the pot hole, removing water and debris.
- Cut it into rectangular shapes with vertical sides.
- Remove any loose material.
- Apply a track coat of asphalt emulsion on all sides and the bottom.
- Mix clean and dry aggregates with HPCPL MS cationic bitumen emulsion (typically using 13.2 mm and 11.2 mm sized aggregates in a 2:1 ratio).
- Ensure proper mixing and uniform coating.
- Fill the premix into the pot hole, slightly higher than the adjoining road surface, and roll it properly.
- Open the repaired pot hole to traffic once workers and equipment are clear.
2. Premix Carpet for Wearing Course:
- Emulsion is used for economical and fast construction of the wearing course.
Recommended Rate of Application: The typical rate of application for BituPlus Bitumen Emulsion CMS-2h in Patch Repairing/Pot Hole Repairing is 7% by weight of aggregates.
Availability: BituPlus asphalt emulsion CMS-2h is available in bulk, IBC tanks, flexi tanks, reconditioned steel drums (220 liters, net weight: 200 ± 3 kg), and new steel drums (220 liters, net weight: 200 ± 3 kg).
Delivery: Delivery options include FOB, CFR, and CIF. For more detailed information about our delivery options or to make inquiries, please do not hesitate to contact us. We are here to assist you with any questions or requests you may have.